top of page

STAIN PADS

StainPad-EcommerceImages-R1-BenefitsOnly.jpg

ORIGINAL

Two 6" x 8" x 1/2" pads per package.

Makes 12-16 applicators.

  • For small, detailed projects

  • Access bends, corners and recesses

$19.99

DOUBLE THICK

One 6" x 8" x 1" pad per package.

Makes 6-8 applicators.

  • For larger, flat projects

  • Easier for larger hands to hold

$14.99

ABOUT

We Believe that Every Project Deserves the Perfect Finish Stain Pad is our Solution

and Flag Ship Product

Stain Pad is a microfiber cloth around a sponge applicator pad. It is a disposable alternative to bristle brushes, provides better durability than a foam brush, and more control than a shop towel or rag. It is perfect for furniture, cabinets, trim, cutting boards, bowls and any fine woodworking project. 

  • Stain Pad is designed to be easily cut to create an applicator that fits your needs. Use scissors to easily cut the pad fit your project, cut it to fit the stain can, of cut a small strip for testing stains.  

  • Each 6”x 8” pad is generally cut into 4-8 applicators.

  • May be used with all wood finishes and sealers. (Gel Stain, Wax, Water or Oil Based Finishes, Polyurethane, Hardening Oils, Shellac, Varnish).  

  • Stain Pad works on any wood surface. Unlike terrycloth pads, Stain Pad's loop-free material resists snagging on rough surfaces—ideal for distressed or reclaimed wood projects. 

  • Stain Pad’s foam core absorbs, holds, and evenly releases stain providing a smooth, consistent, streak-free finish with reduced need for reloading. The impermeable center membrane lets you apply finish with one side and use the other side to wipe off excess for perfect depth of color and a smooth finish.

  • The outer layer won’t leave lint, fuzz or bristles in your finish. *****Important Note: The cutting process will create lint. You must remove this lint prior to finishing. The pads are easily cleaned with fingers, forced air, or painter’s tape.***** 

  • After you finish with your applicator, simply let it dry and then throw it away. Its open cell foam allows the pad to dry out quickly making it less susceptible to spontaneous combustion. (Proper disposal is always recommended) 

ABOUT
FEATURES

FEATURES

FEATURES & BENEFITS
CUT TO SIZE
SUPERIOR LOADING
STREAK FREE
SNAG RESISTANT
LINT FREE
VERSATILE FINISHES
ECONOMICAL
KitchenCarpentry_ApplicanceIntegrationHL

FEATURES & BENEFITS

GETTING STARTED

1.CUT 

  1. Open - resealable bag from the bottom

  2. Size applicator to project or can  

  3. Cut to desired size

  4. Replace remaining pads in resealable bag

2.CLEAN

  1. Use your fingers to pull any lose material from all cut edges.

  2. Once shedding stops, use forced air or tape to clean all cut edges and face of the pad.

3.USE

  1. Hold with one hand and use the rounded edge for application.

  2. Load one side of the rounded end of the pad.

  3. Apply in long even strokes across your project.

  4. Use the other side to wipe smooth or remove excess stain.

Diagram_StainPad.png

4.DISPOSE

  1. When you are done with the first coat, you can wrap the applicator in plastic or aluminum foil and place it in the freezer to use for additional coats.

  2. If you are done with the applicator, set it aside, away from any combustable materials and allow it to fully dry before properly disposing of the pad.

GETTING STARTED
PRO TIPS

PRO TIPS